Hard Wood Flooring

HARD WOOD FLOORING, 1-2 ROOMS
It is necessary for a big machine to be used for the initial clean up stage of this type of floor. A fine finishing machine hasn’t got the cutting ability to clean off the old varnish. You therefore need to use a fairly aggressive grit grade. A 36 grit can sometimes be sufficient on the big machine, but you might need a 24 grit.

For more information on ways in which to improve your pine floorboards please contact us on 0208 453 1160 or email us at websales@floorsanderhireuk.com

PREVIOUSLY FINISHED HARD WOOD FLOORING PACK, 1-2 ROOMS

For 10″ Endless Belt:
24 grit zirconia endless belt
40 grit zirconia endless belt
60 grit zirconia endless belt
120 grit zirconia endless belt

For VIKING Edger:
16 grit discs
40 grit discs
80 grit discs
120 grit discs

Please note: Packs are always supplied on a ‘Sale or Return’ basis

We strongly advise you to use the Trio fine-finishing machine with the big machine. The overall result will be much better than using just the endless belt machine, for a similar price.

Tungsten scraper-for cleaning up behind radiator pipes and in corners
Ear protectors, supplied free
Valved PP2 dust masks x 2
Cellulose filler to mix with fine dust

Optional
Trio fine-finishing machine
Highly recommended for this floor type

VARNISH/OILS & ACCESSORIES OFFER
To take advantage of our varnish/oils discounts of 10% when bundled with the machine hire, these items must be ordered at the same time as the machines, or purchased when machines are delivered or collected.